Step 1: Disconnect the wiring harness on the back of the fog light assembly.
Step 2: Loosen and remove the two 10mm retaining bolts that hold the fog light in place.
Your vehicle may have small covers on the bolts. Remove them, if necessary.
Step 3: You can now push the fog light assembly through the FRONT of the vehicle.
NOTE: If you ordered your replacement fog light from Go-Part.com, it likely includes a new bulb, as most of our models do. This can save you an installation step! If your particular model does not include a bulb, simply turn the socket counter-clockwise, remove it from the old assemble, and insert it into the new one.
Step 4: Mount the new fog light by tightening the two 10mm retaining bolts.
Step 5: Connect the wiring harness to the back of the new fog light assembly.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
These Part Change / Installation Instructions Apply to
03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998, 97 1997 Pontiac Grand Prix Fog Light Replacement Instructions
