Step 2: Remove the two 7mm bolts located just above the tail light assembly.
Step 3: You can now remove the tail light assembly from the vehicle.
To remove the tail light, pull outward, in a diagonal line.
Step 4: Disconnect the wiring harnesses from the back of the tail light assembly.
NOTE: If you ordered your replacement tail light assembly from Go-Part.com, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs, simply turn the sockets counter-clockwise, remove them, and attach them to the new assembly. This only takes a few moments!
Step 5: Connect the wiring harnesses to the new tail light assembly.
Step 6: Mount the new tail light by using the guiding pins to ensure proper placement and tightening the 7mm bolts.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
