Step 2: Loosen and remove the T20 Torx screw that secures the side marker light to the vehicle.
This screw is located just above where the headlight and side marker light assemblies meet.
Step 3: You can now pull the side marker light from the vehicle.
Step 4: Disconnect the wiring harness from the back of the side marker light assembly.
Step 5: Connect the wiring harness to the new side marker light assembly.
Step 6: Mount the new side marker light by using the guiding tabs to ensure proper placement, and tightening the T20 Torx screw.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
