Step 1: Using a towel to protect the paint with a screwdriver, remove the interior trim plate covering the connection point for the mirror.
Step 2: If necessary, remove the small speaker.
Step 3: Remove the two 10mm nuts that hold the mirror in place.
Step 4: Disconnect the wiring harness that powers the mirror.
Step 5: Gently slide the mirror from the door.
Step 6: Slide the replacement side mirror into place.
Step 7: Tighten the nuts that secure the mirror.
Step 8: Reconnect the wiring harness to ensure that your powered windows perform properly!
Step 9: Reconnect the speaker (if necessary).
Step 10: Snap the interior trim panel into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: