Step 1: Pry and remove the trim panel that lines the area near the PASSENGER's feet.
Step 2: Open the glove compartment. Disengage the retaining clips (2) that keep the glove compartment upright, and lower the compartment. The resistor is now exposed.
Step 3: Disconnect the fan speed resistor's wiring harness (1).
Step 4: Using the 8mm socket/ratchet with an extension, loosen and remove the 8mm bolts (2) that secure the resistor to the vehicle.
Step 5: You can now remove the fan speed resistor.
Step 6: Insert the new fan speed resistor, and secure its position by tightening the 8mm bolts (2).
Step 7: Connect the wiring harness (1) to the new fan speed resistor.
Step 8: Re-engage the clips (2) that hold the glove compartment in place.
Step 9: Reattach the trim panel near the PASSENGER'S feet.
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998, 97 1997, 96 1996 Ford Taurus, Mercury Sable AC Heater Fan Speed Resistor Replacement Instructions
