1996-2007 Dodge Caravan, Chrysler Town and Country Sway Bar Stabilizer Link Replacement Instructions, Install, Change (1997 1998 1999 2000 2001 2002 2003 2004 2005 2006)

Tools required:

18mm wrench

Lug wrench

Allen Wrench set

Jack/stands

Step 1: Use the lug wrench to loosen the wheel's lug nuts. Jack up the vehicle and support it using the stands. You can now fully remove the wheel.

Step 2: Use an Allen wrench (size varies) to secure the 18mm bolt (1) on top of the sway bar link, and loosen it.

Step 3: Using the same technique in Step 2, loosen and remove the 18mm bolt (1) on the other end of the sway bar link.

Step 4: You can now fully loosen and remove both 18mm bolts (2).

Step 5: The sway bar link stabilizer should be free from the vehicle.

Step 6: Mount the new stabilizer link by tightening the 18mm bolts (2).

NOTE: Be sure that these bolts are secure. Use the Allen wrench to hold the component still while tightening the mounting bolts.

How do you Change, Replace, or Install 1996-2007 Dodge Caravan, Chrysler Town and Country Sway Bar Stabilizer Link Replacement