Step 1: Remove the 3 bracing bar running diagonally across your engine area.
These bolts are 13mm in size, so use the wrench or socket to remove them.
Step 2: Remove the coolant line.
Step 3: Using a pair of pliers, remove the two clamps that secure the upper radiator hose in place.
NOTE: While you are performing this task, it may be a good time to drain and replace the coolant in the vehicle. If you have recently done so, simply use a â€œcatch panâ€ to capture the leaking coolant, and replace it once the task is finished.
Step 4: Remove the hose.
This may take a bit of pulling, as the hose is under immense pressure and heat throughout the daily use of the vehicle.
Step 5: Clean the connection ends with a dry towel and wire brush.
This helps to remove the particulates that accumulate over time.
Step 6: Using the pliers, put the two clamps on the hose itself, and move it into place.
Step 7: Once the hose is in place, you can use the pliers to secure the hose by moving the circular clamps onto the connection areas.
Step 8: Top off your coolant reservoir with anti-freeze, and replace the coolant line.
Step 9: Replace the bracing bar.
These Part Change / Installation Instructions Apply to
05 2005, 04 2004, 03 2003, 02 2002, 01 2001, 00 2000, 99 1999, 98 1998, 97 1997, 96 1996 Pontiac Grand Prix Upper Radiator Hose Replacement Instructions