Step 2: Loosen and remove the 2 Phillips screws exposed by opening the tailgate.
Step 3: You can now remove the tail light assembly.
Step 3: Disconnect the wiring harness attached to the back of the assembly.
NOTE: If you ordered your replacement tail light from Go-Part.com, it likely includes new sockets, bulbs, and wiring, as most of our models do. This saves you an installation step! However, if your particular model does not, simply remove the sockets and wiring from the old assembly and attach it to the new one. This process takes just a few moments!
Step 4: Connect the tail light's wiring harness.
Step 5: Mount the tail light by tightening the 2 Phillips screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: