Step 2: Loosen and remove the 2 Phillips screws that secure the tail light to the vehicle.
These screws are exposed by opening the tailgate, and are located on the inner part of the tail light mounting area.
Step 3: Disconnect the tail light assembly's wiring harness.
You will need to disengage the small red safety tab to fully release the harness. This tab is located on the plug itself.
Step 4: Connect the wiring harness to the new tail light assembly.
Step 5: Mount the tail light assembly by tightening the 2 Phillips retaining screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: