Step 1: Locate and remove the three retaining bolts beneath the vehicle's glove compartment. Remove the panel.
Step 2: The blower motor is now exposed.
Step 3: Remove the three 6mm retaining bolts that hold the blower motor in place.
Step 4: Disconnect the wiring harness that powers the blower motor.
Step 5: You can now pull the old blower motor from the vehicle.
Step 6: Place the new blower motor into place, connect the wiring harness, and secure it by tightening the three 6mm retaining bolts.
Step 7: Reattach the protective panel that covers the area.
Tighten the three bolts that secure the panel into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: