Step 1: Remove the plastic protective panel over the radiator by disengaging the mounting clips. Once they are disengaged, you can remove the panel.
Use the flathead screwdriver to remove the clips.
Step 2: Loosen and remove the two 13mm mounting bolts that hold the headlight assembly in place.
Step 3: You can now lift the light from the vehicle.
Step 4: Disconnect the wiring harness attached to the back of the headlight assembly.
Step 5: Connect the wiring harness to the back of the new headlight assembly and move it into place.
Step 6: Secure the headlight assembly's position by tightening the two 13mm mounting bolts.
NOTE: Be sure to use the spacers that were in place before you remove the bolts in the first place - they protect your assembly!
Step 7: Reattach the plastic radiator cover.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: