Step 2: Remove the access panel just behind the tail light assembly.
Step 3: Disconnect the wiring harnesses that are attached to the back of the tail light assembly.
Step 4: Remove the four 8mm retaining bolts that hold the tail light in place.
You will have to remove the wire clips from the upper two bolts.
Step 5: You can now pull the tail light assembly from the vehicle.
Step 6: Disconnect the wiring harnesses and attach them to the back of your new assembly.
Step 7: Tighten the four retaining bolts to secure the new tail light assembly in place.
Step 8: Replace the panel that covers the mounting point.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
