Step 1: From the front of the vehicle, loosen and remove the T2 Torx screws that hold the marker assembly in place.
One T2 screw is located beneath the headlight (between the headlight and turn signal), while the other is located between the side marker light and the headlight.
Step 2: You can now pull the marker light from the vehicle.
Step 3: Disconnect the wiring harness from the marker light.
Some models may require turning the socket counter-clockwise and removing it from the old assembly. If this is the case, simply insert it into the new assembly.
Step 4: Connect the wiring harness to the new marker light assembly.
Step 5: Mount the side marker light by tightening the two T2 mounting screws.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
