Step 1: Locate and remove the Phillips retaining screws.
They are located just to the outside of the fog light assembly (from the exterior of the vehicle).
Step 2: Using a flathead screwdriver, gently pry the fog light from the vehicle.
Step 3: Disconnect the wiring harness from the back of the fog light assembly.
Step 4: Connect the wiring harness to your new fog light assembly.
Step 5: Push the fog light assembly into place, and secure it by tightening the two Phillips retaining screws.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website: