Step 2: Loosen and remove the two Phillips screws that secure the tail light assembly.
These screws are exposed by opening the door. BE CAREFUL not to drop the screws down inside the chassis!
Step 3: You can now pull the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harness from the back of the tail light.
Step 5: Connect the wiring harness to the new tail light assembly.
Step 6: Move the new tail light into position. Use the alignment tabs to ensure proper positioning.
Step 7: Tighten the 2 Phillips mounting screws to secure the tail light assembly.
Please Note
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
This article pertains to the following products sold on our website:
