Step 2: Loosen and remove the 10mm mounting bolts (2) that secure the parking light assembly to the vehicle.
One 10mm bolt is on each side of the parking light.
Step 3: Loosen and remove the Phillips screws (2) located on top of the headlight assembly.
Step 4: You can now pull the parking light assembly from the FRONT of the vehicle.
Step 5: Twist and remove the sockets/bulbs (2) attached to the back of the parking light assembly.
Step 6: Loosen and remove the 11mm bolt (1) on the back of the parking light assembly that secures the metal trim to the assembly.
Step 7: Loosen and remove the Phillips screws (3) that secure the trim to the parking light assembly.
Step 8: Mount the NEW parking light assembly to the trim casing by tightening the Phillips screws (3) and the 11mm bolt (1).
Step 9: Insert the sockets/bulbs (2) into the parking light assembly, and move it into position in the front of the vehicle.
Step 10: Secure the parking light assembly by tightening the Phillips screws (2) located on top of the headlight assembly.
Step 11: Tighten the 10mm mounting bolts (2) on the back of the assembly to finalize the installation.
These Part Change / Installation Instructions Apply to
96 1996, 95 1995, 94 1994, 93 1993, 92 1992 Ford F-150 Front Parking Light Replacement Instructions
